How To Manage Guitar Cables

How To Manage Guitar Cables: Cable Management For Guitars

How to manage guitar cables? How do you hide guitar cords? How do you organize music cables? How do studios manage cables? Organizing cables can be a fun way for others, but it can also be depressing for some. The questions mentioned above are really usually asked when it comes to organizing cables for studios and stages, which is why we have decided to give our answer and give light to everyone who is still having problems organizing their cables.

If you are having problems managing your guitar cables, then you are in the right place as we are going to take that headache away from you.

So, what is a guitar cable, and why does your guitar need one? A guitar cable has low power and has a high impedance, and it is built to carry weak unamplified signals from the guitar to your amplifier, which results in audible audio. 

A guitar cable is made of a single small-diameter positive inner, which is usually a 24 gauge that runs through a braided shield conductor that serves as its ground connection and is also added with some insulators and the outer jacket.

Guitar cables are small and lightweight, which is perfect for flexibility and portability. Its shielding also prevents the noise from some external electromagnetic interference that most low-power signals are known to be more susceptible to.

How Do Studios Manage Cables?

We all know that cables in studios are too many to count and really get messy if it is not properly organized. Fortunately, you do not have to spend a fortune to be able to organize the cables. These methods will surely help you in fixing this unpleasant problem.

A studio’s first option for organizing its cables is to buy a cable management sleeve. It is a cheap and very practical thing to do. A cable management sleeve lets you bundle up all the cables into a single sleeve so they do not dangle anywhere. This setup is so pleasing to look at and fixes your cables’ problems.

For guitar cables in studios that need to be organized after using from a practice session, they usually use Velcro strips to prevent the cables from coming apart. It is one of the simplest things to do when it comes to organizing cables, and they are also inexpensive. It is also a good thing to do if you are going to travel and are planning to bring some cables with you.

If the studio uses a rack to organize its signal processors and other types of equipment, then having a cable management rack is the perfect way to organize the cables. A cable rack allows you to keep all the cables inside the rack, and you just need them to run through their dedicated slots, as it will prevent them from tangling the other cables.

Another way that studios organize their cables is that they use a cable hanger that is mountable on walls. They are very easy to install, as you can either hang them on your wall or on your cabinet if you have one in your studio. They are a good option to use if most of the unused cables are unplugged from the guitar, amplifier, or audio processors.

Lastly, one of the more popular methods nowadays to organize cables is to use a CableBox. A CableBox is a type of product that allows for quick and easy cable management. It has enough space to house the extra cable lengths and can be closed up, which hides the mess given by the unorganized cables.

How Do You Hide Guitar Cords?

In hiding your guitar cords, there is still no better way than to use the appropriate length that you will need, rather than using a very long one that will be very hard for you to organize. Most guitar players use either a 3-meter or 4-meter cable as they are easier to organize after playing. In short, just use what you need for your setup.

If you hate organizing guitar cables, one thing you should look into is using a wireless guitar system. They are already tried and tested and are very comfortable to play with, as you do not need to mind the long cables that are plugged into your guitars. You do not need to use long guitar cables, so you do not have to hide any guitar cords already.

However, if you need to use guitar cables, you have to do it. The only problem is that maybe your guitar amp needs to have a long guitar cable to be plugged into its line output that will be sent to the PA mixer. Depending on how long the cable is that you will really need, a great thing to do to hide the cable is to put them on the floor and use floor tape to hide them.

How Do You Organize Music Cables?

Organizing music cables is an important trait that every musician must learn. Being able to organize your music cables properly will not only help in prolonging the cable’s lives but will also give you peace of mind, as you do not have to see your cables get messy.

One thing you can do to organize your music cables is to use adhesive labels on them so that you can easily identify them. This can make your life easier when you have to set up and tear down your gears. It is an efficient way to organize things that you should try on your own setup.

The next thing you can use to organize your music cable is rack cable management clips. It is important that you keep your cables as tidy as possible, and using a cable management clip will help you to achieve this goal of yours. You do not have to use any adhesives or loop strips to organize the cables, and it will still look good and clean that what you have ever imagined.

Although overlooked, using cable ties is also an excellent way to organize your music cables. They are inexpensive and are also durable, and they are perfect for organizing things like cables. Just separate the guitar and mic cables before you plan to roll the cables up to easily identify them the next time you use it. 

If you always tear down your setup after using it, then an organized drawer is maybe what you need. After rolling up the cables, you can organize them the way you want it to be. A separate drawer for the guitar cables, a separate drawer for the microphone cables, a separated drawer for audio processor cables, and a separated drawer for the extra and backup cables.

But before doing any of these methods, you have to first shake out the cable to prevent having any twists and kinks. Then start to roll up your cable. After finishing, you can now either use a Velcro, cable tie, or any other materials to prevent the cable from coming apart.

So, how to manage guitar cables? To manage guitar cables, it is either to use some products like a rack cable hanger, a cable management sleeve, or an under-desk cable manager to prevent the cables from getting messy. You can also use some Velcro strips or cable ties for a more inexpensive way to manage guitar cables.

Leave a Comment