How To Patch A Hole In An Acoustic Guitar

How To Patch A Hole In An Acoustic Guitar: Patch A Guitar

Can a guitar with a hole be fixed? How do I fill a hole in my guitar? Does a hole in a guitar affect the sound? Does a hole in my guitar affect its durability? Should I patch if there is a hole in my acoustic guitar? It is normal to be concerned when you have these problems with your acoustic guitar, and it is typical for most people to ask these questions. If you are reading this article right now, then you are in the right place and at the right time as we are going to clear up things about fixing holes in an acoustic guitar.

So, how can there be holes in your acoustic guitar? There are some acoustic guitars that have thin sides and cannot take a hit compared to others, so they are more prone to get damaged when it is hit by a table or any other hard things. There are really moments that it can happen even if you are careful in using your acoustic guitar; the good thing is that there is still a great chance that it can be repaired. 

In the question of whether a hole can lessen the durability of your acoustic guitar, yes, it can. These holes can lead to crack, and there are really moments where a part of your guitar will take a hit on a chair or even walls, and these things can lead to more damage to your guitar and could render it impossible to be repaired.

Can A Guitar With A Hole Be Fixed?

So, can a guitar with a hole be fixed? Depending on the severity of the damage, but on most occasions, you can still find a way to fix it. The problem with these punctured holes in your guitar is that they will really affect the sound. The question is how severely affected is the sound of your acoustic from the puncture hole acquired. The answer is that it only depends on the severity of the hole. If it is that severe, then expect that the guitar will really sound too dull.

Does A Hole In A Guitar Affect The Sound?

Why would your acoustic sound bad when there is a punctured hole in it? The body of an acoustic guitar is designed to amplify the vibration produced by the strumming of the strings. If a part of the guitar’s body has a punctured hole or cracks, it will interrupt the vibration and will stop it from transmitting.

How Do I Fill A Hole In My Guitar?

When your acoustic guitar has a hole in it, it could lead to a huge problem, but if you know how to fix it as early as possible, then it would be better. There are two methods that you can try on your guitar, and these are the most inexpensive and easy ways to fix your problem with your acoustic guitar.

Method 1

For the first method, you will need a tweezer, wood glue, sandpaper, a wood stain, and a wood filler. The first thing you should do is to retrieve any fragments, splinters, or even wood pieces inside your guitar’s body using the tweezer. After cleaning it up, you now find a piece of wood that preferably matches the colour and grain of your guitar. It would be better if it had the same thickness.

The next thing you should do is measure the hole that you are going to fill up and check if the pieces of wood you picked up are already enough to fill the hole. If it is enough, then start to cut a wood patch that will be able to fill the hole properly. 

The next step is to sand down the sides of the wood patch you are going to fill the hole. Sand down also its edges. After finishing, use the wood glue and apply it to the edges of the punctured hole, then start to place the wood patch into the hole. You can use a weighted object or a clamp to keep the patch in the hole until it dries. Wait until the glue dries up before doing anything.

After it dries up, you can now start to sand down the patch. You have to be very detailed when you sand the edges and make sure that it is as smooth as possible. After, you can already wipe the remaining wood dust away. After cleaning the wood dust, get the wood stain and apply a coat of it to the filled area. Wait for it to dry and check if the colour matches properly. If needed, you can apply a second coat of wood stain to the area.

One thing you should remember when executing this method is not to buy a wood stain that is flammable. Do not also use any flammable materials, and do not do this method near an open flame. It would be better if you applied the wood stain in a well-ventilated place.

Method 2

For the second method, we are going to use epoxy putty rather than patch it with wood. The first thing is to slice a little bit of epoxy and put some wood stain on it. Start to mix it until the epoxy is filled with the colour of the wood stain you have applied. After mixing it properly, you now place the epoxy putty onto the hole and wait for it to dry up before doing anything. 

After it dries up, start to sand the excess part of the epoxy putty. Make sure to do it smoothly to avoid damaging the finish of the guitar. The next is to clean and use any brand of shellac to clear up the filled area before applying another coat of wood stain to it. 

The last is to try to use or even mix some of the wood stains to achieve the closest colour to your guitar’s finish. It is also important that your work would also restore your guitar’s beautiful look, which is why it is important to do it perfectly. Apply the coat of the wood stain until it matches perfectly with your guitar.

So, can a guitar hole be fixed? Yes, it can be, but it still depends on the severity of the damage. There are ways to fix this problem; however, the best thing would still be for you to be careful with your guitar. Although, if it comes to the point that your guitar will have a punctured hole, always remember that you can still fill it up with either an epoxy putty or a wood patch and make your acoustic guitar sound good again.

Leave a Comment